1. The push table saw belongs to professional cutting equipment, and the user must be strictly controlled. The staff on the post must be trained.
2. Before starting the machine tool, it is necessary to ensure that the saw blade pad, nuts and screws of all parts are fastened. If there is any loosening, it must be dealt with immediately, and the equipment can be started after tightening.
3. After starting the saw blade, it is necessary to check whether the rotation direction of the saw blade is correct and ensure that the steering is opposite to the direction of material propulsion, otherwise it is easy to fly material.
4. Circular saw blade must be equipped with protective cover, otherwise it is not allowed to start. When feeding, the wood must rely on the workbench and the board, and the hand should not be near the saw blade, so as not to cause dangerous accidents.
5. When the table saw is abnormal, the power supply should be cut off immediately, and the operation should be stopped, and the special person should be sent for maintenance and adjustment.
6, for the processing of the wood must check whether there are foreign bodies such as nails, sand and stone at the sawcutting place of the wood, so as not to cause foreign bodies to fly out and hurt people or damage the saw blade.
7. The power supply must be cut off when the table saw is cleaned, lubricated and removed.
8, at the end of the work, to timely clean the bottom of the machine tool, the internal chip, especially to keep the track (often wiped with a soft cloth accounting for butter) and the drive wheel clean.
9, the commonly used adjustment, locking bug plug to commonly used resin detergent cleaning, and coated with lubricating oil, to ensure its normal work.
10. When the table saw is working, it must be equipped with a dust suction device to prohibit the flying of wood chips.
